Avdoo Grabill

Cabinetry proposal · 242 East 71st Street, New York

Crafted in wood.
Set in stone.

▶  Watch the film Presented by Ohad Berebi · Featuring Grabill Custom Cabinetry, est. 1946
Ohad Berebi logo in walnut and marble

A note to the Avdoo team

A building made to last deserves cabinetry built the same way.

242 East 71st is the kind of building New York doesn’t see often: RAMSA’s architecture, Alyssa Kapito’s interiors, and a developer who treats every detail as part of the story.

We studied the design development set closely. The painted kitchens with wood islands, the micro-shaker panels, the fluted glass and metal at the range: this page shows how we would build them, residence after residence, without the design losing anything on the way from drawing to kitchen.

I went to Grabill, Indiana to see the workshop for myself before bringing it to you. I’m proposing it because it pairs true custom craftsmanship with the capacity a 50-residence building needs, and because my team will be here in New York, on site, from the first sample door to the last punch-list item.

Ohad Berebi20 years across the US and European markets · 1,500+ projects

01 · The design

Our read of 242 East 71st.

Drawn from the interiors design development set. Every kitchen type and elevation, read before we propose a single door.

22Stories
50Residences
RAMSAArchitecture
Alyssa KapitoInteriors
Kitchen K3.1 range wall with fluted glass, over the design set elevationVisualization · K3.1
Kitchen with WD-03 wood island and fluted glass wall cabinetsVisualization · kitchen & island
  • Painted kitchens, wood islandsCabinetry in the PT-01 lacquer, islands in the WD-03 wood, with a reveal below the counter on all sides.
  • Micro-shaker panelsA quiet shaker edge on three sides; pairs of doors read as one panel.
  • Full-height storageTall pantries, blind-reach corners and integrated appliance columns.
  • Touch-latch uppersThe top level of cabinets opens without hardware, so the ceiling line stays clean.
  • Fluted glass and metalRemovable fluted panels at the range hood and glass-front uppers at the bar walls.
  • Many kitchen typesK0 through K5 with their variants, plus primary and secondary vanities.

02 · Specification

Built to your specification.

The kitchen notes in the design set, line by line, and how Grabill builds each one.

ElementDesign intent · 242 E 71st DD setGrabill
Cabinet boxesSolid plywood boxes, maple veneer at all interiors¾″ plywood box, ½″ plywood back, 1/16″ solid lumber edge banding; maple veneer interiors
DrawersDrawers and cabinet dividers in solid maple5/8″ solid maple, hand-sanded dovetails, ½″ plywood bottom in dado
ShelvesMaple-veneered plywood on solid metal shelf pinsAs specified
Doors & panelsSolid wood, or solid wood and MDF combinedAvondale and Fulton door styles, MDF finish
Painted finishLacquer finish, PT-01 at all kitchen cabinetsFactory lacquer. Grabill matches any color; PT-01 and the 40% sheen included in standard pricing
IslandsWD-03 wood, with a reveal below the counter on all sidesWD-03 island fronts, side and back panels
HardwareBlum soft-close on all doors and drawersBlum Clip-Top BLUMOTION hinges, Blum MOVENTO full-extension runners
Inserts & pull-outsHäfele Fineline inserts; Häfele / Rev-A-Shelf pull-outs or equalIntegrated in the shop drawings
Upper cabinetsTop level on touch latch; 12″ clear interiorAs specified
Glass & metalRemovable fluted glass/metal panels at the range hoodFluted glass (GL-01) and polished nickel (MT-01), included in the package

Final details are confirmed with the design team in the shop drawings by Ohad Berebi & Grabill, before production.

03 · The cabinet

The box, built to last.

Photographed at the Grabill factory in Indiana: the actual cabinet construction behind every residence.

Grabill base cabinet with Shaker door at the factory
PLAN SECTION · BASE CABINET FULL-ACCESS INTERIOR ½″ plywood back ¾″plywoodside 1/16″ solid lumberedge banding ¾″ doordoweled joints BlumClip-Top SECTION · DOVETAIL DRAWER 5/8″solidlumber ½″ plywood bottomcaptured in dado BlumMOVENTO Diagram not to scale; thicknesses exaggerated for clarity.
  • ¾″ plywood boxFrameless, full-access construction. Wall cabinets have finished bottoms as standard.
  • ½″ plywood backA full plywood back, not a thin panel, for a rigid, square cabinet.
  • 1/16″ solid lumber edge bandingFinished to match the exterior. A distinct Grabill differentiator.
  • 5/8″ dovetail drawersSolid maple, walnut or rift white oak; ½″ plywood bottom captured in dado grooves.
  • Doweled door jointsExtra strength; clear bumpers press-fit for the life of the cabinet.
Plywood edge with solid lumber banding

The edge

Multi-ply ¾″ plywood, banded with 1/16″ solid lumber.

Raw plywood cabinet boxes at the factory

The box

Plywood sides, back and bottom, before finishing.

Open cabinet interior with Blum hinges

The interior

Veneer interiors, adjustable shelves, Blum hinges throughout.

Blum CLIP top BLUMOTION hinge

Blum Clip-Top BLUMOTION

Inline backplate, three-way adjustment, integrated soft-close on every door.

Blum MOVENTO runner

Blum MOVENTO

Full-extension runners, 125 lb capacity (170 lb heavy-duty option).

Drawer with solid wood cutlery insert

Drawer interiors

A wide selection: cutlery and utensil inserts, deep drawers for dishes, pots and pans, pantry pull-outs.

Corner and panel protection
Example box label with QR code and box number for 242 East 71st

Packing & delivery

Double-packed. Protected.

  • Double packing. Every cabinet boxed individually, corners and panels protected for transit.
  • QR-coded per cabinet. Every box carries its own QR code, tied to its residence, room and cabinet number.
  • Shipped domestically. Trucked from Indiana. No containers, no waiting at the port.
  • Confirmed delivery. Packing list and ETA sent once the truck is loaded.
  • Straight to the right unit. The shipping company and the project manager deliver directly to the right residence. All handled by Ohad Berebi’s team.

Cabinet photos: Grabill factory, Grabill, Indiana. Hardware images: Blum. Diagram not to scale.

04 · Doors & finishes

Selected for this building.

The door styles and palette approved by the design team for 242 East 71st.

Avondale door

Avondale

MDF finish

Fulton door

Fulton

MDF finish

The approved palette

Per the design set

PT-01 · Mountain Peak WhiteBenjamin Moore 2148-70 · cabinets 40% sheen
WD-03 · Island & vanity woodKitchen island and primary vanity
GL-01 · Fluted glassBack-painted PT-01 · at the range hood
MT-01 · MT-02 · Polished nickelRange hood, moveable island, bathroom legs
Any colorGrabill matches any color. PT-01 is matched exactly.
40% sheenPer the design team, included in standard pricing.
LacquerFactory lacquer on all painted surfaces.
SamplesEvery finish confirmed with physical samples before production.

05 · Scope

Kitchens & vanities. One maker.

The full cabinetry package, nothing excluded: one standard of construction and finish across the residence, so the kitchen and the vanities read as one design.

Kitchens

Every kitchen type in the set, islands included.

Vanities

Primary and secondary baths.

Project scope · Included

Kitchens

  • All carcasses + Blum hardware
  • PT-01 painted fronts
  • WD-03 island fronts, side and back panels
  • MT-01, GL-01 fronts + hood covers
  • Moveable tables

Bathrooms

  • Primary and secondary carcasses + hardware
  • Secondary fronts; primary WD-03 fronts
  • MT-02 base legs

Services

  • Shop drawings by Ohad Berebi & Grabill
  • Sample doors in PT-01 and WD-03
  • Delivery to the project location
  • Installation by Ohad Berebi’s team
  • On-site supervision and a dedicated project manager, through the final punch list

Exclusions

None.

One maker and one team for the full cabinetry package, from shop drawings to installation. No scope split between vendors.

06 · Process

50 residences. One standard.

How a multi-residence project moves from the design set to keys, with one team accountable from start to finish.

01

Design review

Every kitchen type and vanity with the Avdoo and Kapito teams: finishes, hardware, appliances.

02

Shop drawings

Ohad Berebi & Grabill issue drawings, cabinet cards and item lists. Nothing is built before you sign off.

03

Samples & model unit

Sample doors in PT-01 and WD-03, then a model kitchen installed for approval.

04

Promised ship week

Once an order is complete, a promised ship week is set for each phase, floor by floor.

05

Production

Built to order in Grabill, Indiana, with a dedicated project manager from order to post-delivery.

06

Delivery & installation

Double-packed, QR-coded per cabinet, delivered straight to the right unit, installed by Ohad Berebi’s team.

USABuilt and shipped domestically

No overseas freight. No waiting at the port.

7–10Days for a replacement part

Typical turnaround, straight from the factory.

2×Double-packed

Every corner and panel protected in transit.

07 · Why Grabill, why us

Custom craft, at the scale of a building.

1946Founded in Grabill, Indiana
120,000Sq ft of workshop
20Years · Ohad Berebi
1,500+Projects delivered
  • Capacity. Built to handle volume most custom shops can’t, without giving up customization.
  • Craftsmen. A community of cabinetmakers in Grabill, Indiana, with CNC precision behind every piece.
  • Real support. In-house customer service, project managers and engineers. Grabill is part of Revive Home Brands.
  • Frameless construction. Custom modifications, custom millwork and any color matched.
  • Accountable locally. One New York partner from the first sample to the last punch-list item.

08 · The film

Two minutes in our world.

The workshop, the materials and the city. Sound on.

New York

Made for the city we call home.